Intumescent Steel Coating - Off-Site, Solvent Based
SC604 is a borate free, high solids, low VOC single pack acrylic thin film intumescent for the protection against fire of internal and semi exposed structural steelwork, optimised to provide 60 minutes fire resistance.
SC604 is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollow columns and beams, as well as cellular beams, concrete filled hollows and solid steel tension rods. Limited 90 minute protection is also available. SC604 can be used on steel, cast iron and galvanised steel. On-site, standard dry version, SC605, is also available.
Detailed application instructions are available for SC600, SC800 and SC900 series that must be consulted prior to commencing application. Please visit https://www.nullifire.com/en_GB/technical-zone/download-centre/
USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Safety data sheet must be read and understood before use. Flammable - keep away from open flames and other ignition sources.
Nullifire Application Instructions SC600 Series (en-GB).pdf | Application Instructions | |
SC604-5 EN13381-6 Loading Table.pdf | Loading Tables | |
SC604_5 EN13381-10 Loading Table (en-GB).pdf | Loading Tables | |
SC604 Declaration of Performance (en-GB).pdf | Declaration of Performance | |
SC604 Safety Data Sheet (en-GB).pdf | Safety Data Sheets | |
SC604 Technical Data Sheet (en-GB).pdf | TDS | |
Nullifire Specification Control Guidance Note (en-GB).pdf | Technical Guidance Document |